Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 121.002 - ELECTRICAL EQUIPMENT AND INSTRUMENTS Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
BATTERY, STARTER CABLE |
- | XXX XXX XXX XXXX | - | - | |
| 001 | LEAD BATTERY 12 V | 001 | A 00 054 146 01 | - | - |
| LEAD BATTERY 12 V 56 AH EXPORT - SPECIAL REQUEST (TROPICAL DESIGN) |
001 | A 00 054 112 01 | - | - | |
| COLD START BATTERY 12 V 56 AH SPECIAL REQUEST - FOR REGIONS WITH COLD TEMPERATURES |
001 | A 00 054 158 01 | - | - | |
| 002 | FIXING FRAME | 001 | A 12 154 001 23 | - | - |
| 003 | TIGHTENING SCREW FOR FIXING OF BATTERY |
002 | A 12 054 101 24 | - | - |
| LOCK WASHER B 6 DIN 127 FOR FIXING OF BATTERY |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR FIXING OF BATTERY |
002 | - | - | ||
| RUBBER HOSE 20 MM LONG ABOVE ANGLE OF SUPPORTING RAIL ORDER BY THE METER |
002 | A 00 098 705 32 | - | - | |
| 004 | RUBBER PLUG FOR BLIND HOLE IN FRONT WALL |
004 | A 00 098 703 15 | - | $0.81 |
| 004 | RUBBER PLUG FOR BLIND HOLE IN FRONT WALL |
005 | A 00 098 703 15 | - | $0.81 |
| STARTER CABLE FROM POS.POLE TO STARTER MOTOR Replaced by: A 128 540 00 30 |
- | A 18 054 000 30 | - | - | |
| 006 | STARTER CABLE FROM POS.POLE TO STARTER MOTOR |
001 | A 12 854 000 30 | - | - |
| STARTER CABLE FROM POS.POLE TO STARTER MOTOR |
001 | A 12 154 001 30 | - | - | |
| 007 | RUBBER PROTECTIVE CAP FOR STARTER CABLE |
001 | A 13 654 600 35 | - | - |
| 008 | GROUND CABLE FROM NEG.POLE OF BATTERY TO CLUTCH HOUSING |
001 | A 18 054 000 31 | - | - |
| GROUND CABLE FROM NEG.POLE OF BATTERY TO CLUTCH HOUSING |
001 | A 18 054 004 31 | - | - | |
| 009 | GROMMET FOR STARTER CABLE THROUGH PARTITION |
001 | A 18 699 707 81 | - | $2.61 |
| GROMMET FOR STARTER CABLE THROUGH PARTITION |
001 | A 18 699 704 81 | - | $2.33 | |
| 010 | FIXING CLAMP FOR STARTER CABLE AT FRONT WALL OR MOUNTING CONTROL SHAFT RESP. |
001 | A 18 799 500 37 | - | - |
| FIXING CLAMP FOR STARTER CABLE AT FRONT WALL OR MOUNTING CONTROL SHAFT RESP. |
001 | A 18 199 500 20 | - | - | |
| LENS-HD.SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR FIXING CLAMP |
001 | - | - | ||
| LENS-HD. SCREW AM 5X10 DIN 7985-4S FOR FIXING CLAMP |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR FIXING CLAMP |
001 | - | - | ||
| 011 | GROMMET FOR STARTER CABLE THROUGH FIXING ANGLE, FRONT WALL |
001 | A 00 099 734 81 | - | $1.11 |
CABLES |
- | XXX XXX XXX XXXX | - | - | |
| MAIN CABLE HARNESS UP TO CHASSIS 7506729 |
001 | A 12 154 001 05 | - | - | |
| REPLACED BY 121 540 07 05 TOGETHER WITH 1 FUSE BOX 180 540 09 50 FROM CHASSIS 7506730-7520625 |
- | A 12 154 005 05 | - | - | |
| 015 | MAIN CABLE HARNESS FROM CHASSIS 7520626 |
001 | A 12 154 007 05 | - | - |
| MAIN CABLE HARNESS UP TO CHASSIS 7505869 |
001 | A 12 154 002 05 | - | - | |
| REPLACED BY 121 540 08 50 TOGETHER WITH 1 FUSE BOX 180 540 09 50 FROM CHASSIS 7505870-7518698 |
- | A 12 154 006 05 | - | - | |
| MAIN CABLE HARNESS FROM CHASSIS 7518699 |
001 | A 12 154 008 05 | - | - | |
| 016 | HOUSING, LOWER PART, WITH SOCKET |
001 | A 00 054 506 28 | - | - |
| 017 | GASKET | 001 | A 00 054 500 80 | - | - |
| CABLE HARNESS FOR TAIL LIGHTS UP TO CHASSIS 7514212 |
001 | A 12 154 001 07 | - | - | |
| CABLE HARNESS FOR TAIL LIGHTS UP TO CHASSIS 7514212 |
001 | A 12 154 002 07 | - | - | |
| 019 | CABLE HARNESS FOR TAIL LIGHTS FROM CHASSIS 7514213 |
001 | A 12 154 008 07 | - | - |
| 020 | CABLE HARNESS FROM GENERATOR TO REGULATOR |
001 | A 18 054 000 08 | - | $41.76 |
| 021 | RUBBER PROTECTIVE CAP FOR TERMINAL AT GENERATOR D POS. AND DF |
002 | A 00 054 602 35 | - | - |
| INSULATING HOSE B 16X18 SW 200 MM LG. DIN 40621 OVER MAIN CABLE HARNESS, ROTARY SWITCH ORDER BY THE METER |
001 | - | - | ||
| 023 | CABLE HARNESS FROM 2-POLE CABLE CONNECTOR TO REVERSE DRIVE LIGHT |
001 | A 12 054 017 38 | - | - |
| 024 | BRACKET FOR CABLE HARNESS AT REVERSE DRIVE LIGHT SWITCH |
001 | A 18 054 600 43 | - | - |
| 025 | GROMMET FOR CABLE HARNESS AT BRACKET |
001 | A 00 099 731 81 | - | $0.98 |
| FIXING CLAMP FOR CABLE TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT |
002 | A 18 199 500 20 | - | - | |
| LENS-HD. SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR CABLE TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT |
001 | - | - | ||
| GROUND CABLE FROM STARTER FLANGE TO FRONT WALL Replaced by: A 186 540 03 41 |
- | A 13 654 004 41 | - | - | |
| 026 | GROUND CABLE FROM STARTER FLANGE TO FRONT WALL |
001 | A 18 654 003 41 | - | $97.85 |
| GROUND CABLE FROM STARTER FLANGE TO FRONT WALL |
001 | A 12 054 000 41 | - | - | |
| 027 | SCREW WITH LOCKING PLATE FOR GROUND CABLE AT PEDAL FLOOR |
001 | A 12 042 002 27 | - | $7.40 |
| LOCK WASHER B 6 DIN 127 FOR GROUND CABLE AT PEDAL FLOOR |
001 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR GROUND CABLE AT PEDAL FLOOR |
001 | - | - | ||
| 031 | CABLE CONNECTOR, 5-POLE FOR STEERING SPINDLE CABLE HARNESS |
002 | A 00 054 619 41 | - | - |
| 032 | CABLE CONNECTOR, 5-POLE FOR STEERING SPINDLE CABLE HARNESS |
001 | A 00 054 606 41 | - | - |
| 033 | CABLE CONNECTOR, 2-POLE FOR HEATING BLOWER CONNECTION |
002 | A 00 054 618 41 | - | $48.92 |
| LENS-HD. SHEET METAL SCREW B 3,9X9,5 DIN 7981 FOR CABLE CONNECTOR, 5-POLE, AT FRONT WALL |
004 | - | - | ||
| LENS-HD. SHEET METAL SCREW B 3,9X19 DIN 7981 FOR CABLE CONNECTOR, 5-POLE, AT WHEEL ARCH PAN, STEERING SPINDLE CABLE HARNESS |
002 | - | - | ||
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE CONNECTOR, 2-POLE, AT WHEEL ARCH PAN, LEFT AND RIGHT, HEATER BLOWER |
004 | - | - | ||
| 037 | GROMMET FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | A 18 199 700 81 | - | - |
| 038 | GROMMET FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | A 00 099 727 81 | - | $1.49 |
| 38a | GROMMET FOR BLINKER LIGHT AT WHEEL ARCH |
002 | A 00 099 722 81 | - | $0.98 |
| GROMMET FOR FOOT DIMMER SWITCH |
001 | A 00 099 730 81 | - | $1.79 | |
| 039 | FIXING CLAMP | 005 | A 00 098 833 78 | - | $0.67 |
| 039 | FIXING CLAMP | 001 | A 00 098 833 78 | - | $0.67 |
| 040 | FIXING CLAMP | 001 | A 00 098 834 78 | - | $0.36 |
| 040 | FIXING CLAMP | 005 | A 00 098 834 78 | - | $0.36 |
| GROUND CABLE FOR PARKING LIGHT WITH ASYMMETR. DIMMER LIGHT FROM CHASSIS 7517272 |
002 | A 18 054 030 38 | - | - | |
| GROUND CABLE FOR PARKING LIGHT WITH ASYMMETR. DIMMER LIGHT UP TO CHASSIS 7520625 |
- | A 18 054 030 38 | - | - | |
| GROUND CABLE FOR PARKING LIGHT WITH ASYMMETR. DIMMER LIGHT UP TO CHASSIS 7518698 |
- | A 18 054 030 38 | - | - | |
| GROMMET FOR FUEL TRANSMITTER CABLE Replaced by: A 000 997 18 81 |
- | A 00 099 717 81 | - | - | |
| 042 | GROMMET FOR FUEL TRANSMITTER CABLE |
001 | A 00 099 718 81 | - | - |
| GROMMET FOR LUGGAGE COMPARTMENT LID, INTERIOR PLATE UP TO CHASSIS 7514212 |
001 | A 00 099 722 81 | - | $0.98 | |
| GROMMET FOR REAR SEAT SUPPORT AND TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504119 |
002 | A 00 099 730 81 | - | $1.79 | |
| INSULATING HOSE B 12X13, 6X40 MM LG. SW DIN 40621 FOR MAIN CABLE HARNESS AT WHEEL ARCH PAN ORDER BY THE METER |
002 | - | - | ||
| FIXING CLAMP FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE |
008 | A 00 098 833 78 | - | $0.67 | |
| FIXING CLAMP FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE |
005 | A 00 098 834 78 | - | $0.36 | |
| FIXING CLAMP FOR TRANSMITTER CABLE UP TO CHASSIS 7514212 |
001 | A 18 699 502 20 | - | $11.11 | |
| LOCK WASHER B 5 DIN 127 FOR FIXING CLAMP, TRANSMITTER CABLE UP TO CHASSIS 7514212 |
001 | - | - | ||
| LENS-HD. SCREW AM 5X10 DIN 7985-4S FOR FIXING CLAMP, TRANSMITTER CABLE UP TO CHASSIS 7514212 |
001 | - | - | ||
| LENS-HD. SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE, TRANSMITTER, AT REAR CROSS MEMBER FROM CHASSIS 7514213 |
001 | - | - | ||
| FIXING CLAMP 1X8 DIN 72571 UP TO CHASSIS 7514212 |
001 | - | - | ||
| LENS-HD. SCREW AM 4X10 DIN 7985-4S UP TO CHASSIS 7514212 |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 UP TO CHASSIS 7514212 |
001 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S UP TO CHASSIS 7514212 |
001 | - | - | ||
| 056 | LINK FOR TAIL LIGHT CABLE HARNESS, LEFT AND RIGHT |
008 | A 12 054 601 82 | - | - |
| LOCK WASHER B 4 DIN 127 FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT, FOR TAIL LIGHT |
002 | - | - | ||
| LENS-HD. SCREW AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT, FOR TAIL LIGHT |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT, FOR TAIL LIGHT |
002 | - | - | ||
| TEROSTAT CABLE, 6-MM DIA., 50-MM LONG FOR TAIL LIGHT CABLE HARNESS THROUGH WHEEL ARCH, REAR ORDER BY THE METER |
002 | A 00 098 946 85 | - | - | |
| CLIP FOR CABLE OF IDENTIFICATION LIGHT AT LUGGAGE COMPARTMENT LID UP TO CHASSIS 7514212 |
003 | A 00 098 817 78 | - | - | |
| FIXING CLAMP FOR CABLE OF IDENTIFICATION LIGHT AT LUGGAGE COMPARTMENT LID UP TO CHASSIS 7514212 |
002 | A 18 699 502 20 | - | $11.11 | |
| 061 | CABLE COVER PLATE FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER |
001 | A 12 054 600 81 | - | - |
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER |
002 | - | - | ||
| 063 | FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 13 699 500 37 | - | $27.83 |
| LENS-HD.SCREW AM 4X10 DIN 7985-4S FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| LENS-HD. SCREW AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| 066 | CAGE CLIP WITH NUT FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 00 099 022 91 | - | - |
Replaced by: A 000 997 47 82 |
- | A 12 099 708 82 | - | - | |
| HOSE PIECE, 20 MM LONG ABOVE STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS Replaced by: A 000 997 47 82 |
- | A 18 099 715 82 | - | $3.50 | |
| 067 | HOSE PIECE, 20 MM LONG ABOVE STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS ORDER BY THE METER |
004 | A 00 099 747 82 | - | - |
| 068 | FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 13 699 501 35 | - | - |
| 069 | FIXING CLAMP FOR STEERING SPINDLE CABLE HARNESS AT FORKED SUPPORT |
001 | A 18 199 500 20 | - | - |
| LENS-HD. SHEET METAL SCREW B 4,2X9,5 DIN 7981 FOR STEERING SPINDLE CABLE HARNESS AT FORKED SUPPORT |
001 | - | - | ||
| FIXING CLAMP FOR CABLE STOP SWITCH AT BRAKE PIPE |
002 | A 00 198 809 78 | - | - | |
| FUSE BOX WITH FUSE AND BRASS SCREW UP TO CHASSIS 7520625 |
001 | A 18 054 003 50 | - | - | |
| FUSE BOX WITH FUSE AND BRASS SCREW UP TO CHASSIS 7518698 |
- | A 18 054 003 50 | - | - | |
| 071 | FUSE BOX WITH FUSE AND BRASS SCREW FROM CHASSIS 7520626 |
001 | A 18 054 009 50 | - | - |
| 071 | FUSE BOX WITH FUSE AND BRASS SCREW FROM CHASSIS 7518699 |
- | A 18 054 009 50 | - | - |
| 072 | COVER FOR FUSE BOX |
001 | A 00 054 502 03 | - | $73.37 |
| 073 | FUSE, 12 AMPERES 8 DIN 72581 UP TO CHASSIS 7520625 |
012 | - | - | |
| 073 | FUSE, 12 AMPERES 8 DIN 72581 UP TO CHASSIS 7518698 |
- | - | - | |
| 073 | FUSE, 12 AMPERES 8 DIN 72581 FROM CHASSIS 7520626 |
011 | - | - | |
| 073 | FUSE, 12 AMPERES 8 DIN 72581 FROM CHASSIS 7518699 |
- | - | - | |
| 73a | FUSE, 35 AMPERES 25 DIN 72581 FROM CHASSIS 7520626 |
001 | - | - | |
| 73a | FUSE, 35 AMPERES 25 DIN 72581 FROM CHASSIS 7518699 |
- | - | - | |
| LENS-HD. SHEET METAL SCREW BZ 4,2X19 DIN 7981 FOR FUSE BOX AT PARTITION |
002 | - | - | ||
| FIXING CLAMP FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | A 18 199 500 20 | - | - | |
| LENS-HD. SCREW AM 4X10 DIN 7985-4S FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | - | - | ||
| 077 | FIXING CLAMP FOR CABLE TO STOP LIGHT |
001 | A 15 399 503 22 | - | - |
| LENS-HD.SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR CABLE TO STOP LIGHT |
001 | - | - | ||
| 078 | FIXING CLAMP FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT AT GUTTER |
002 | A 00 098 888 78 | - | - |
| 079 | FIXING CLAMP FOR MAIN CABLE HARNESS AND BRAKE PIPE AT FRONT FRAME, CROSS MEMBER |
002 | A 12 199 500 22 | - | - |
| HEX. -HD. SHEET METAL SCREW B 6,3X16 DIN 7976 FOR MAIN CABLE HARNESS AND BRAKE PIPE AT FRONT FRAME, CROSS MEMBER |
002 | - | - | ||
INSTRUMENTS AND CONTROLS |
- | XXX XXX XXX XXXX | - | - | |
| PUSH-BUTTON SWITCH FOR INSTRUMENT LIGHTING Replaced by: A 000 545 06 11 |
- | A 12 054 000 44 | - | - | |
| 080 | PUSH-BUTTON SWITCH FOR INSTRUMENT LIGHTING |
001 | A 00 054 506 11 | - | $29.83 |
| 081 | ESCUTCHEON | 001 | A 12 054 500 72 | - | - |
| 082 | FELT RING | 001 | A 00 099 720 40 | - | $0.50 |
| 083 | BUTTON | 001 | A 12 054 502 37 | - | - |
Replaced by: A 121 542 03 01 |
- | A 12 154 202 01 | - | - | |
| COMBI-INSTRUMENT WITH KILOMETER INDICATION RATIO 0.96 Replaced by: A 121 542 03 01 |
- | A 12 154 200 01 | - | - | |
| 084 | COMBI-INSTRUMENT WITH KILOMETER INDICATION RATIO 0.96 |
001 | A 12 154 203 01 | - | - |
| COMBI-INSTRUMENT WITH MILEAGE INDICATION RATIO 1.54 EXPORT |
001 | A 12 154 201 01 | - | - | |
| COMBI-INSTRUMENT WITH KILOMETER INDICATION RATIO 0.88 EXPORT - SPECIAL REQUEST FOR TIRES 6.40-15 |
001 | A 12 154 208 01 | - | - | |
| COMBI-INSTRUMENT WITH MILEAGE INDICATION RATIO 1.425 EXPORT - SPECIAL REQUEST FOR TIRES 6.40-15 |
001 | A 12 154 209 01 | - | - | |
| 085 | KILOMETER COUNTER RATIO 0.96 |
001 | A 00 154 243 06 | - | - |
| MILEAGE COUNTER RATIO 1.54 EXPORT |
001 | A 00 154 242 06 | - | - | |
| KILOMETER COUNTER RATIO 0.88 EXPORT - SPECIAL REQUEST FOR TIRES 6.40 - 15 |
001 | A 00 154 278 06 | - | - | |
| MILEAGE COUNTER RATIO 1.425 EXPORT - SPECIAL REQUEST FOR TIRES 6.40 - 15 |
001 | A 00 154 279 06 | - | - | |
| 086 | OIL PRESSURE GAUGE | 001 | A 00 054 271 02 | - | - |
- TELETHERMOMETER, LENGTH OF CAPILLARY TUBE 1.700-MM Replaced by: A 001 542 44 05 |
- | A 00 154 243 05 | - | - | |
| 087 | - TELETHERMOMETER, LENGTH OF CAPILLARY TUBE 1.700-MM |
001 | A 00 154 244 05 | - | - |
| 088 | FUEL GAUGE | 001 | A 00 054 244 03 | - | - |
| 089 | TENSION SPRING FOR FIXING OF COMBI-INSTRUMENT |
002 | A 12 099 317 10 | - | - |
| 090 | RUBBER FRAME FOR COMBI-INSTRUMENT |
001 | A 12 054 202 80 | - | - |
| LAMP SOCKET Replaced by: A 000 545 07 19 |
- | A 18 354 500 19 | - | - | |
| 091 | LAMP SOCKET | 006 | A 00 054 507 19 | - | - |
| BULB H 12 V 2 W DIN 72601 |
006 | - | - | ||
| FIXING CLAMP FOR HOUSING, UPPER PART WITH LOWER PART, AT GLOVE BOX COVER PLATE |
002 | A 00 098 834 78 | - | $0.36 | |
| CLOCK WITH MECHANIC DRIVE UP TO CHASSIS 8506580 |
001 | A 12 054 203 11 | - | - | |
| CLOCK WITH Replaced by: A 120 542 06 11 |
- | A 12 054 205 11 | - | - | |
| 100 | CLOCK WITH ELECTRICAL DRIVE FROM CHASSIS 8506581 |
001 | A 12 054 206 11 | - | - |
| LAMP SOCKET Replaced by: A 000 545 07 19 |
- | A 18 354 500 19 | - | - | |
| 101 | LAMP SOCKET | 001 | A 00 054 507 19 | - | - |
| BULB H 12 V 2 W DIN 72601 |
001 | - | - | ||
| 109 | DIMMING RESISTOR FOR INSTRUMENT LIGHTING |
001 | A 00 054 508 31 | - | - |
| 110 | SWITCH |
001 | A 00 054 517 14 | - | - |
| 111 | ESCUTCHEON | 001 | A 12 054 503 72 | - | - |
| DISTANCE LIGHT BLINKER SWITCH, BLACK Replaced by: A 000 545 38 24 |
- | A 00 054 510 24 | - | - | |
| DISTANCE LIGHT BLINKER SWITCH, BLACK UP TO CHASSIS 7516459 |
001 | A 00 054 538 24 | - | - | |
| DISTANCE LIGHT BLINKER SWITCH, IVORY COLOURED SPECIAL REQUEST UP TO CHASSIS 7516459 |
001 | A 00 054 539 24 | - | - | |
| 113 | DISTANCE LIGHT BLINKER SWITCH FROM CHASSIS 7517460 |
001 | A 00 054 576 24 | - | - |
| REPLACED BY 180 545 04 37 FOR DISTANCE LIGHT BLINKER SWITCH FROM CHASSIS 7517460 Replaced by: A 180 545 04 37 |
- | A 18 054 500 37 | - | - | |
| BLINKER LEVER KNOB, BLACK FOR DISTANCE LIGHT BLINKER SWITCH FROM CHASSIS 7517460 Replaced by: A 180 545 04 37 |
- | A 18 054 502 37 | - | - | |
| 114 | BLINKER LEVER KNOB, BLACK FOR DISTANCE LIGHT BLINKER SWITCH FROM CHASSIS 7517460 |
001 | A 18 054 504 37 | - | $30.25 |
| REPLACED BY 180 545 05 37 FOR DISTANCE LIGHT BLINKER SWITCH SPECIAL REQUEST FROM CHASSIS 7517460 Replaced by: A 180 545 05 37 |
- | A 18 054 501 37 | - | - | |
| BLINKER LEVER KNOB, IVORY COLOURED FOR DISTANCE LIGHT BLINKER SWITCH SPECIAL REQUEST FROM CHASSIS 7517460 Replaced by: A 180 545 05 37 |
- | A 18 054 503 37 | - | - | |
| BLINKER LEVER KNOB, IVORY COLOURED FOR DISTANCE LIGHT BLINKER SWITCH SPECIAL REQUEST FROM CHASSIS 7517460 |
001 | A 18 054 505 37 | - | - | |
| 115 | COVER PLATE FOR DISTANCE LIGHT BLINKER SWITCH FROM CHASSIS 7517460 |
001 | A 18 046 200 23 | - | - |
| REPLACED BY AM 4X10 DIN 7988-4 S FROM CHASSIS 7516460 |
- | A 18 099 000 31 | - | - | |
| LENS-HD. COUNTERSUNK SCREW AM 4X10 DIN 7988-4 S VERCHROMT FOR COVER PLATE AT JACKET TUBE FROM CHASSIS 7516460 |
002 | - | - | ||
| 116 | BLINKER TRANSMITTER 12 V FOR DISTANCE LIGHT BLINKER SYSTEM |
001 | A 00 054 423 32 | - | - |
| 117 | REVERSING SWITCH FOR TURN-INDICATOR BLINKER FROM CHASSIS 7521717 SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR |
001 | A 00 054 591 24 | - | - |
| BLINKER LEVER KNOB, BLACK FOR REVERSING SWITCH FROM CHASSIS 7521717 SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) |
001 | A 18 054 504 37 | - | $30.25 | |
| BLINKER LEVER KNOB, IVORY COLOURED FOR REVERSING SWITCH FROM CHASSIS 7521717 SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOM |
001 | A 18 054 505 37 | - | - | |
| ADDITIONAL CABLE HARNESS FOR TURN-INDICATOR BLINKER LIGHT FROM CHASSIS 7521717 SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTO |
001 | A 18 054 016 09 | - | - | |
| HEX. -HD.SCREW M 6X12 DIN 933-8 G FOR BLINKER TRANSMITTER AT PARTITION |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BLINKER TRANSMITTER AT PARTITION |
002 | - | - | ||
| OIL PRESSURE GAUGE PIPE FOR CONNECTION AT FLEXIBLE HOSE TO OIL FILTER UP TO CHASSIS 9503021 |
001 | A 18 054 008 60 | - | - | |
| OIL PRESSURE GAUGE PIPE FOR CONNECTION AT FLEXIBLE HOSE TO OIL FILTER UP TO CHASSIS 9503860 |
001 | A 18 054 009 60 | - | - | |
| OIL PRESSURE GAUGE PIPE FOR CONNECTION AT OIL PRESSURE GAUGE, COMBI-INSTRUMENT UP TO CHASSIS 9503021 |
001 | A 18 054 006 60 | - | - | |
| OIL PRESSURE GAUGE PIPE FOR CONNECTION AT OIL PRESSURE GAUGE, COMBI-INSTRUMENT UP TO CHASSIS 9503860 |
001 | A 18 054 003 60 | - | - | |
| 123 | OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO HOSE FROM CHASSIS 9503022 |
001 | A 18 054 013 60 | - | - |
| OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO COUPLING PIECE FROM CHASSIS 9503861 |
001 | A 12 054 005 60 | - | - | |
| COUPLING PIECE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503861 |
001 | A 12 854 200 47 | - | - | |
| OIL PRESSURE GAUGE PIPE FROM COUPLING PIECE TO HOSE FROM CHASSIS 9503861 |
001 | A 12 054 006 60 | - | - | |
Replaced by: A 000 997 47 82 |
- | A 12 099 708 82 | - | - | |
| RUBBER HOSE 20 MM LONG FOR BOX NUT TO OIL PRESSURE GAUGE PIPE - ORDER BY THE METER Replaced by: A 000 997 47 82 |
- | A 18 099 715 82 | - | $3.50 | |
| RUBBER HOSE 20 MM LONG FOR BOX NUT TO OIL PRESSURE GAUGE PIPE - ORDER BY THE METER UP TO CHASSIS 9503021 |
001 | A 00 099 747 82 | - | - | |
| RUBBER HOSE 20 MM LONG FOR BOX NUT TO OIL PRESSURE GAUGE PIPE - ORDER BY THE METER UP TO CHASSIS 9503860 |
001 | A 00 099 747 82 | - | - | |
| GROMMET FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED Replaced by: A 186 997 06 81 |
- | A 18 699 705 81 | - | - | |
| 124 | GROMMET FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED UP TO CHASSIS 9503021 |
002 | A 18 699 706 81 | - | $1.79 |
| 124 | GROMMET FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED UP TO CHASSIS 9503860 |
002 | A 18 699 706 81 | - | $1.79 |
| 124 | GROMMET FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED FROM CHASSIS 9503861 |
001 | A 18 699 706 81 | - | $1.79 |
| LOCK WASHER B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503021 |
001 | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503860 |
001 | - | - | ||
| HEX. NUT M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503021 |
001 | - | - | ||
| HEX. NUT M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503860 |
001 | - | - | ||
| 125 | SPRING WASHER A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503022 |
002 | - | - | |
| 125 | SPRING WASHER A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503861 |
002 | - | - | |
| 126 | HEX. NUT BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503022 |
001 | - | - | |
| 126 | HEX. NUT BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503861 |
001 | - | - | |
| 127 | RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END |
002 | A 00 098 709 32 | - | $6.65 |
| 128 | FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END |
002 | A 13 699 505 01 | - | - |
| LENS-HD.SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END |
002 | - | - | ||
| FIXING CLAMP FOR CAPILLARY TUBE AT FRONT WALL |
001 | A 13 699 505 01 | - | - | |
| LENS-HD. SHEET METAL SCREW B 3,9X9,5 DIN 7981 FOR CAPILLARY TUBE AT FRONT WALL |
001 | - | - | ||
| HOSE FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503021 |
001 | A 12 154 000 59 | - | - | |
| HOSE FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503860 |
001 | A 12 154 000 59 | - | - | |
| 130 | HOSE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503022 |
001 | A 12 854 000 59 | - | $43.69 |
| HOSE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503861 |
001 | A 12 154 002 59 | - | $84.01 | |
| 131 | STOP LIGHT SWITCH SEE ALSO GROUP 42 |
001 | A 00 054 522 09 | - | - |
| 132 | FOOT DIMMER SWITCH | 001 | A 00 054 504 12 | - | - |
| 133 | INSULATING PLATE FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
001 | A 13 654 501 58 | - | - |
| LENS-HD. COUNTERSUNK SCREW BM 4X30 DIN 7988-4S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | - | - | ||
| 135 | CAGE CLIP WITH NUT FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | A 00 099 025 91 | - | - |
| GROMMET FOR CABLE TO FOOT DIMMER SWITCH |
001 | A 00 099 727 81 | - | $1.49 | |
| FLEXIBLE DRIVE SHAFT, 1,750-MM LONG Replaced by: A 120 542 03 07 |
- | A 12 054 204 07 | - | - | |
| 137 | FLEXIBLE DRIVE SHAFT, 1,750-MM LONG |
001 | A 12 054 203 07 | - | - |
| 138 | GROMMET FOR FLEXIBLE DRIVE SHAFT THROUGH FORKED SUPPORT FROM CHASSIS 75020313 |
002 | A 18 099 712 81 | - | - |
| 139 | GROMMET FOR SEALING 3RD PASSAGE OF FORKED SUPPORT FROM CHASSIS 75020313 |
001 | A 18 098 700 44 | - | - |
| GROMMET FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL Replaced by: A 186 997 04 81 |
- | A 18 399 701 81 | - | $6.44 | |
| GROMMET FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL |
001 | A 18 699 704 81 | - | $2.33 | |
| GROMMET FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL |
001 | A 00 099 731 81 | - | $0.98 | |
| FIXING CLAMP FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT |
002 | A 00 098 834 78 | - | $0.36 | |
| 140 | FIXING CLAMP FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT |
001 | A 12 099 500 01 | - | - |
| LENS-HD.SCREW AM 5X10 DIN 7985-4S FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT |
001 | - | - | ||
| 144 | THREE-ELEMENT VOLTAGE | 001 | A 00 015 455 06 | - | - |
| 145 | RUBBER BUSHING | 003 | A 00 015 402 50 | - | - |
| LOCK WASHER B 6 DIN 127 FOR REGULATOR AT BRACKET, WHEEL ARCH PAN |
003 | - | - | ||
| LENS-HD.SCREW AM 6X20 DIN 7985-4S FOR REGULATOR AT BRACKET, WHEEL ARCH PAN |
003 | - | - | ||
| 148 | GROMMET FOR CABLE, VOLTAGE REGULATOR, GENERATOR |
003 | A 00 099 707 81 | - | $1.35 |
| ADDITIONAL CABLE HARNESS SPECIAL REQUEST (FOG LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA) |
001 | A 12 154 017 09 | - | - | |
| INSULATING HOSE 100-MM LONG B 20X22,4 SW DIN 40621 ORDER BY THE METER SPECIAL REQUEST (FOG LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE |
001 | - | - | ||
| FUSE BOX, 2-POLE SPECIAL REQUEST (FOG LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA) |
001 | A 00 054 503 01 | - | - | |
| CYLINDRICAL SCREW AM 4X15 DIN 84-4 S FOR FUSE BOX AT AIR DUCT, LEFT SPECIAL REQUEST (FOG LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA) |
001 | - | - | ||
Replaced by: A 001 542 20 20 |
- | A 00 054 273 20 | - | - | |
Replaced by: A 001 542 20 20 |
- | A 00 054 244 20 | - | - | |
| HORN Replaced by: A 001 542 20 20 |
- | A 00 154 207 20 | - | - | |
| 150 | HORN | 001 | A 00 154 220 20 | - | - |
| HORN FOR EXPORT CARS TO FRANCE |
001 | A 00 054 271 20 | - | - | |
| HORN Replaced by: A 001 542 08 20 |
- | A 00 054 245 20 | - | - | |
| HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNALSYSTEM |
001 | A 00 154 208 20 | - | - | |
| HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNALSYSTEM |
001 | A 00 054 246 20 | - | - | |
| 152 | HEX. -HD.SCREW M 10X28 DIN 931-8 G FOR HORN AT BRACKET |
001 | - | - | |
| 153 | LOCK WASHER B 10 DIN 127 FOR HORN AT BRACKET |
001 | - | - | |
| 154 | HEX. NUT M 10 DIN 934-5 S FOR HORN AT BRACKET |
001 | - | - | |
| HEX. -HD.SCREW M 10X28 DIN 931-8 G FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| HEX. NUT M 10 DIN 934-5 S FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| BRACKET FOR HORN AT CROSS TUBE, FRONT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 10 120 612 00 31 | - | - | |
| BRACKET FOR HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 054 204 40 | - | - | |
| HEX. -HD.SCREW M 6X15 DIN 933-8 G FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| WASHER A 6,4 DIN 9021 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION AT HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
004 | - | - | ||
| CYLINDRICAL SCREW AM 4X8 DIN 84-4 S FOR CABLE CONNECTION AT HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
004 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION AT HORN |
002 | - | - | ||
| CYLINDRICAL SCREW AM 4X8 DIN 84-4 S FOR CABLE CONNECTION AT HORN |
002 | - | - | ||
| 160 | IGNITION COIL | 001 | A 00 015 800 03 | - | - |
| 161 | FIXING CLAMP FOR IGNITION COIL |
001 | A 00 015 802 40 | - | - |
| CYLINDRICAL SCREW BM 5X40 DIN 84-4 S |
001 | - | - | ||
| SQUARE NUT M 5 DIN 562 |
001 | - | - | ||
| HEX. -HD.SCREW M 6X12 DIN 933-8 G FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| WASHER A 6,4 DIN 9021 FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| 167 | RUBBER PROTECTIVE CAP FOR IGNITION COIL |
002 | A 00 054 602 35 | - | - |
| CONTACTOR Replaced by: A 000 542 27 19 |
- | A 00 054 215 19 | - | - | |
| CONTACTOR SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM AND SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND |
001 | A 00 054 227 19 | - | - | |
| PUSH-PULL SWITCH FOR 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 00 054 506 11 | - | $29.83 | |
| ESCUTCHEON FOR 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 13 654 506 72 | - | $12.73 | |
| FELT RING FOR 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 00 099 720 40 | - | $0.50 | |
| KNOB FOR 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 13 630 209 01 | - | - | |
| ADDITIONAL CABLE HARNESS SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 006 09 | - | - | |
| ADDITIONAL CABLE HARNESS FROM 2ND TO 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 005 09 | - | - | |
| ELECTRICAL CABLE FROM FUSE BOX TO RELAY TERMINAL 30/51 SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 001 38 | - | - | |
| ELECTRICAL CABLE FROM RELAY TERMINAL 87 TO 2ND HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 002 38 | - | - | |
| GROUND CABLE FROM 2ND HORN TO GROUND SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 003 38 | - | - | |
| ELECTRICAL CABLE,BLACK, 80-MM LONG B 1 DIN 72551 FROM RELAY TERMINAL 30 TO RELAY TERMINAL 86 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPO |
001 | - | - | ||
| CABLE TERMINAL 4X0,8 N 261 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL |
005 | - | - | ||
| GROMMET SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL |
005 | A 00 099 701 81 | - | $0.47 | |
| SOCKET WITHOUT HAND LAMP Replaced by: A 000 545 05 25 |
- | A 00 054 513 25 | - | - | |
| SOCKET WITHOUT HAND LAMP SPECIAL REQUEST |
001 | A 00 054 505 25 | - | $11.93 | |
| ELECTRICAL CABLE,BLACK, 1,000-MM LONG A 1 DIN 72551 ORDER BY THE METER SPECIAL REQUEST |
001 | - | - | ||
| INSULATING HOSE, 950-MM LONG B 3X3,8 SW DIN 40621 ORDER BY THE METER SPECIAL REQUEST |
001 | - | - | ||
| BRACKET FOR FUSE BOX SPECIAL REQUEST |
001 | A 12 054 511 95 | - | - | |
| CYLINDRICAL SCREW AM 5X10 DIN 84-4 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST |
002 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST |
002 | - | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST |
002 | - | - |
- To find out where to buy the item or equivalent, click on the part number.