Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 121.042 - HEATING AND VENTILATION Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
HEATING AND VENTILATION |
- | XXX XXX XXX XXXX | - | - | |
| 001 | AIR DUCT, LEFT | 001 | A 40 121 830 09 62 | - | - |
| BRACKET (FOR LEFT BOWDEN CABLE) |
- | A 10 180 831 03 14 | - | - | |
| 004 | FLAP, TOP FOR AIR DUCT |
001 | A 10 180 831 00 43 | - | - |
| 005 | FLAP, BOTTOM FOR AIR DUCT |
001 | A 10 180 831 01 43 | - | - |
| 006 | SPINDLE FOR AIR DUCT |
001 | A 10 180 831 00 48 | - | - |
| 007 | RING (BETWEEN DUCT AND SPINDLE) SPINDLE TO AIR DUCT |
001 | A 10 180 831 00 82 | - | - |
| WASHER 5,3 DIN 125 SPINDLE TO AIR DUCT |
001 | - | - | ||
| 008 | LEVER (FOR UPPER FLAP) | 001 | A 10 180 830 01 56 | - | - |
| 009 | LEVER (FOR LOWER FLAP) | 001 | A 10 180 830 00 56 | - | - |
| THREADED PIN (LEVER TO SPINDLE) M 4X6 DIN 553 |
002 | - | - | ||
| 012 | DISTRIBUTOR, RIGHT | 001 | A 40 121 830 02 05 | - | - |
| 013 | RUBBER MOULDING ORDER BY THE METER FOR STOP AT FRESH-AIR FLAP, FRONT, 230-MM LONG FOR STOP AT FRESH-AIR FLAP, REAR, 100-MM LONG |
NB | A 00 098 728 51 | - | - |
| 014 | FRESH-AIR FLAP (FOR DISTRIBUTOR) |
001 | A 40 121 830 01 43 | - | - |
| 015 | SPINDLE | 001 | A 40 121 831 01 48 | - | - |
| 016 | BUSHING (SPINDLE TO DISTRIBUTOR) |
001 | A 10 120 831 00 82 | - | - |
| WASHER 5,3 DIN 125 |
001 | - | - | ||
| HEX. NUT A M 5 DIN 439 |
002 | - | - | ||
| 017 | LEVER | 001 | A 10 120 831 00 33 | - | - |
| THREADED PIN (LEVER TO SPINDLE) M 4X6 DIN 553 |
001 | - | - | ||
| 020 | HEAT EXCHANGER, LEFT | 001 | A 40 121 835 01 01 | - | - |
| 021 | HEAT EXCHANGER, RIGHT | 001 | A 40 121 835 03 01 | - | - |
| CONTROL VALVE, LEFT Replaced by: A 121 835 00 20 |
- | A 40 121 835 03 20 | - | - | |
| 022 | CONTROL VALVE, LEFT | 001 | A 12 183 500 20 | - | $167.06 |
| CONTROL VALVE, RIGHT | 001 | A 40 121 835 01 20 | - | - | |
| 023 | GASKET (O-RING IN CONTROL VALVE) |
002 | A 00 083 500 98 | - | - |
Replaced by: A 000 983 02 98 |
- | A 00 098 321 92 | - | - | |
| INTERMEDIATE LAYER, 12X60X125-MM FOR HEAT EXCHANGERS Replaced by: A 000 983 02 98 |
- | A 10 120 831 01 93 | - | - | |
| INTERMEDIATE LAYER, 12X60X125-MM FOR HEAT EXCHANGERS STATE LENGTH AND WIDTH WHEN ORDERING |
NB | A 00 098 302 98 | - | - | |
| FELT STRIP, BLACK, 10X1X385-MM LONG FOR HEAT EXCHANGERS STATE LENGTH AND WIDTH WHEN ORDERING |
NB | A 00 098 317 10 | - | $3.27 | |
| BRACKET | - | A 40 121 830 00 50 | - | - | |
| 024 | RUBBER SEAL HEAT EXCHANGER AND BRACKET TO AIR DUCT |
001 | A 10 120 835 00 92 | - | - |
| LENS HEAD SCREW A M 5X15 DIN 7985 HEAT EXCHANGER AND BRACKET TO AIR DUCT |
004 | - | - | ||
| LENS HEAD SHEET METAL SCREW B 4,8X19 DIN 7981 HEAT EXCHANGER AND BRACKET TO AIR DUCT |
004 | - | - | ||
| LENS HEAD SCREW A M 5X10 DIN 7985 HEAT EXCHANGER TO DISTRIBUTOR |
004 | - | - | ||
| LOCK WASHER B 5 DIN 127 HEAT EXCHANGER TO DISTRIBUTOR |
004 | - | - | ||
| CONNECTION FITTING, RIGHT, WITH ANTISQUEAK Replaced by: A 40 121 830 06 21 |
- | A 40 121 830 04 21 | - | - | |
| 025 | CONNECTION FITTING, RIGHT, WITH ANTISQUEAK |
001 | A 40 121 830 06 21 | - | - |
| LENS HEAD SCREW A M 5X10 DIN 7985 CONNECTION FITTING TO HEAT EXCHANGER |
004 | - | - | ||
| LOCK WASHER B 5 DIN 127 CONNECTION FITTING TO HEAT EXCHANGER |
004 | - | - | ||
Replaced by: A 40 121 833 03 31 |
- | A 40 121 833 00 31 | - | - | |
| WIRE CABLE (FOR LEFT UPPER AND LOWER FRESH-AIR FLAPS) Replaced by: A 40 121 833 03 31 |
- | A 40 121 833 01 31 | - | - | |
| 028 | WIRE CABLE (FOR LEFT UPPER AND LOWER FRESH-AIR FLAPS) |
002 | A 40 121 833 03 31 | - | - |
| 029 | CABLE CASING, 575 MM LONG ORDER BY THE METER |
NB | A 00 098 801 72 | - | - |
| INSULATING HOSE, 520-MM LONG B 5X6,2 SW DIN 40 621 ORDER BY THE METER |
NB | - | - | ||
| LOCK PLATE (WIRE CABLES TO FRESH-AIR FLAPS) 4 DIN 6799 |
002 | - | - | ||
| 030 | MOUNTING CLAMP WIRE CABLES TO AIR DUCT |
002 | A 13 699 506 01 | - | $12.65 |
| LENS HEAD SCREW A M 4X10 DIN 7985 WIRE CABLES TO AIR DUCT |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 WIRE CABLES TO AIR DUCT |
002 | - | - | ||
| MOUNTING CLAMP LEFT WIRE CABLE CONTROL ON AIR DUCT |
001 | A 13 699 506 01 | - | $12.65 | |
| LENS HEAD SCREW A M 4X12 DIN 7985 LEFT WIRE CABLE CONTROL ON AIR DUCT |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 LEFT WIRE CABLE CONTROL ON AIR DUCT |
001 | - | - | ||
| WIRE CABLE, 650-MM LONG (FOR LOWER RIGHT DISTRIBUTOR FLAP) Replaced by: A 40 121 833 04 31 |
- | A 40 121 833 02 31 | - | - | |
| 031 | WIRE CABLE, 650-MM LONG (FOR LOWER RIGHT DISTRIBUTOR FLAP) |
001 | A 40 121 833 04 31 | - | - |
| 032 | CABLE CASING, 490 MM LONG ORDER BY THE METER |
001 | A 00 098 801 72 | - | - |
| INSULATING HOSE, 460-MM LONG B 5X6,2 SW DIN 40 621 ORDER BY THE METER |
001 | - | - | ||
| 033 | ATTACHING SCREW WIRE CABLE TO DISTRIBUTOR FLAP |
001 | A 12 136 831 00 89 | - | - |
| 034 | BUSHING WIRE CABLE TO DISTRIBUTOR FLAP |
001 | A 12 136 831 00 90 | - | - |
| WASHER 4,3 DIN 433 WIRE CABLE TO DISTRIBUTOR FLAP |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 WIRE CABLE TO DISTRIBUTOR FLAP |
001 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S WIRE CABLE TO DISTRIBUTOR FLAP |
001 | - | - | ||
| 035 | MOUNTING CLAMP WIRE CABLE TO DISTRIBUTOR |
001 | A 13 699 506 01 | - | $12.65 |
| LENS HEAD SCREW A M 4X10 DIN 7985 WIRE CABLE TO DISTRIBUTOR |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 WIRE CABLE TO DISTRIBUTOR |
001 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S WIRE CABLE TO DISTRIBUTOR |
001 | - | - | ||
| 040 | WIRE CABLE (FOR LEFT CONTROL COCK) |
001 | A 40 121 833 03 31 | - | - |
| 041 | WIRE CABLE (FOR RIGHT CONTROL COCK) |
001 | A 40 121 833 04 31 | - | - |
| 042 | CABLE CASING, 1,160-MM LONG, LEFT ORDER BY THE METER |
001 | A 00 098 801 72 | - | - |
| CABLE CASING, 1,090-MM LONG, RIGHT ORDER BY THE METER |
001 | A 00 098 801 72 | - | - | |
| INSULATING HOSE, 1,100-MM LONG, LEFT B 5X6,2 SW DIN 40 621 ORDER BY THE METER |
001 | - | - | ||
| INSULATING HOSE, 1,030-MM LONG, RIGHT B 5X6,2 SW DIN 40 621 ORDER BY THE METER |
001 | - | - | ||
| LOCK PLATE (WIRE CABLE TO CONTROL COCK) 4 DIN 6799 |
002 | - | - | ||
| 044 | MOUNTING CLAMP (WIRE CABLE TO AIR DUCT) |
001 | A 13 699 506 01 | - | $12.65 |
| LENS HEAD SCREW A M 4X10 DIN 7985 WIRE CABLE TO CONTROL COCK |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 WIRE CABLE TO CONTROL COCK |
001 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S WIRE CABLE TO CONTROL COCK |
001 | - | - | ||
| 045 | MOUNTING CLAMP WIRE CABLE TO DISTRIBUTOR |
001 | A 13 699 506 01 | - | $12.65 |
| HEX. HEAD SCREW M 4X10 DIN 931-8 G WIRE CABLE TO DISTRIBUTOR |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 WIRE CABLE TO DISTRIBUTOR |
001 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S WIRE CABLE TO DISTRIBUTOR |
001 | - | - | ||
| CABLE BRACKET (WIRE CABLE CONTROL TO AIR FLAP WIRE CABLE) A 5X0,3X135 N 286 |
002 | - | - | ||
| CONNECTION FITTING, LEFT, WITH ANTISQUEAK (BETWEEN CONNECTION HOSE AND AIR DUCT, TO HOLD BLOWER) |
001 | A 40 121 830 05 21 | - | - | |
| 046 | CONNECTION FITTING, LEFT | 001 | A 40 121 830 01 21 | - | - |
| 050 | BLOWER, 12 VOLT (IN CASE OF L.H. DRIVE ON THE LEFT, IN CASE OF R.H. DRIVE ON THE RIGHT) FROM MESSRS. AVOG OPTIONAL WITH 120 830 00 |
001 | A 11 120 830 02 08 | - | - |
| 051 | CARBON BRUSH | 002 | A 00 083 501 75 | - | - |
| 052 | IMPELLER (4 BLADES) | 001 | A 10 120 835 01 85 | - | - |
| 053 | RUBBER MOUNTING, SPOKE (FOR BLOWER MOUNTING) |
003 | A 10 120 835 01 28 | - | - |
| BLOWER, 12 VOLT FROM MESSRS. BOSCH OPTIONAL WITH 11 120 830 02 08 |
001 | A 12 083 000 08 | - | - | |
| IMPELLER | 001 | A 00 083 501 85 | - | - | |
| CARBON BRUSH | 002 | A 00 083 504 75 | - | - | |
| LENS HEAD SCREW A M 5X15 DIN 7985 DBL 8451-21 BLOWER TO CONNECTION FITTING |
003 | - | - | ||
| WASHER 5,8 DIN 126 DBL 8451-11 BLOWER TO CONNECTION FITTING |
003 | - | - | ||
| LOCK WASHER B 5 DIN 127 DBL 8451-11 BLOWER TO CONNECTION FITTING |
003 | - | - | ||
| 054 | GROMMET (IN CONNECTION FITTING) |
001 | A 00 099 719 81 | - | - |
| 055 | TIGHTENING STRAP (FOR LEFT AIR DUCT) |
001 | A 10 120 830 01 29 | - | - |
| LENS HEAD SCREW A M 6X25 DIN 7985 TIGHTENING STRAP TO AIR DUCT AND CONNECTION FITTING |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 TIGHTENING STRAP TO AIR DUCT AND CONNECTION FITTING |
001 | - | - | ||
| WASHER 6,4 DIN 125 TIGHTENING STRAP TO AIR DUCT AND CONNECTION FITTING |
001 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S TIGHTENING STRAP TO AIR DUCT AND CONNECTION FITTING |
001 | - | - | ||
| PLUG ONLY APPLICABLE IF BLOWER IS NOT INSTALLED |
001 | A 00 098 701 44 | - | - | |
| RUBBER BUFFER ONLY APPLICABLE IF BLOWER IS NOT INSTALLED |
003 | A 00 098 718 40 | - | $0.81 | |
Replaced by: A 13 136 831 04 94 |
- | A 40 121 831 02 94 | - | - | |
| HOSE, 550-MM LONG (FOR HEAT EXCHANGER, TOP AND BOTTOM) Replaced by: A 13 136 831 04 94 |
- | A 10 121 831 01 94 | - | - | |
| 060 | HOSE, 550-MM LONG (FOR HEAT EXCHANGER, TOP AND BOTTOM) TO BE SHORTENED DURING ASSEMBLY AS REQUIRED |
002 | A 13 136 831 04 94 | - | - |
| 060 | HOSE, 550-MM LONG (FOR HEAT EXCHANGER, TOP AND BOTTOM) TO BE SHORTENED DURING ASSEMBLY AS REQUIRED |
001 | A 13 136 831 04 94 | - | - |
| 061 | HOSE, 50-MM LONG (FOR HEAT EXCHANGER, BOTTOM, LEFT AND RIGHT) N900271 012018 C22 |
001 | - | - | |
| 061 | HOSE, 50-MM LONG (FOR HEAT EXCHANGER, BOTTOM, LEFT AND RIGHT) N900271 012018 C22 |
002 | - | - | |
| HOSE STRAP 5X0,35X140 N 263 HOSE TO HEAT EXCHANGER |
NB | - | - | ||
| HOSE CLAMP WSN 5 N 262 HOSE TO HEAT EXCHANGER |
008 | - | - | ||
| 062 | RUBBER SEAL (BETWEEN AIR DUCT AND COWL) |
001 | A 40 121 831 01 99 | - | - |
| 063 | RUBBER SEAL (BETWEEN COWL AND DISTRIBUTOR) |
001 | A 10 120 831 05 99 | - | - |
| PAD, WOOL FELT, GREY (FOR AIR DUCT) ORDER BY THE METER |
NB | A 00 098 310 92 | - | - | |
| LENS HEAD SCREW A M 6X18 DIN 7985 DBL 8451-21 AIR DUCT TO COWL |
001 | - | - | ||
| LENS HEAD SCREW A M 6X30 DIN 7985 DBL 8451-21 AIR DUCT TO COWL |
002 | - | - | ||
| WASHER 6,4 DIN 125 DBL 8451-11 AIR DUCT TO COWL |
004 | - | - | ||
| HEX. HEAD SCREW M 6X70 DIN 931-8 G DBL 8451-21 AIR DUCT TO COWL |
001 | - | - | ||
| LENS HEAD SCREW A M 6X15 DIN 7985 DBL 8451-21 DISTRIBUTOR TO COWL |
003 | - | - | ||
| WASHER 6,4 DIN 125 DBL 8451-11 DISTRIBUTOR TO COWL |
003 | - | - | ||
| INSECT SCREEN (LEFT SIDE) Replaced by: A 10 180 830 04 18 |
- | A 10 180 830 00 18 | - | - | |
| 064 | INSECT SCREEN (LEFT SIDE) | 001 | A 10 180 830 04 18 | - | - |
| 065 | INSECT SCREEN (RIGHT SIDE) |
001 | A 40 121 830 00 18 | - | - |
| WING SCREW M 6X12 DIN 316 MG INSECT SCREEN TO CONNECTION FITTING OR SCOOP, RESP. |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 INSECT SCREEN TO CONNECTION FITTING OR SCOOP, RESP. |
002 | - | - | ||
| DEFROSTER NOZZLE, LEFT | 001 | A 40 121 830 01 19 | - | - | |
| DEFROSTER NOZZLE, LEFT | 001 | A 40 121 830 05 19 | - | - | |
| 066 | DEFROSTER NOZZLE, LEFT | 001 | A 40 121 830 09 19 | - | - |
| 066 | DEFROSTER NOZZLE, LEFT | 001 | A 40 121 830 09 19 | - | - |
| 067 | DEFROSTER NOZZLE, RIGHT | 001 | A 40 121 830 04 19 | - | - |
| DEFROSTER NOZZLE, RIGHT | 001 | A 40 121 830 07 19 | - | - | |
| DEFROSTER NOZZLE, RIGHT | 001 | A 40 121 830 11 19 | - | - | |
| 068 | FRESH-AIR FLAP FOR RIGHT DEFROSTER NOZZLE |
001 | A 40 121 830 00 43 | - | - |
| SPINDLE FOR RIGHT DEFROSTER NOZZLE Replaced by: A 40 121 831 01 48 |
- | A 40 121 831 00 48 | - | - | |
| 069 | SPINDLE FOR RIGHT DEFROSTER NOZZLE |
001 | A 40 121 831 01 48 | - | - |
| 070 | RING SPINDLE TO RIGHT DEFROSTER NOZZLE |
001 | A 10 120 831 00 82 | - | - |
| WASHER 5,3 DIN 125 SPINDLE TO RIGHT DEFROSTER NOZZLE |
001 | - | - | ||
| HEX. NUT A M 5 DIN 439 SPINDLE TO RIGHT DEFROSTER NOZZLE |
002 | - | - | ||
| 071 | LEVER (FOR RIGHT DEFROSTER NOZZLE) |
001 | A 10 120 831 00 33 | - | - |
| THREADED PIN (LEVER TO SPINDLE) M 4X6 DIN 553 |
001 | - | - | ||
| 072 | WIRE CABLE, RIGHT, TOP (FOR RIGHT DEFROSTER NOZZLE) |
001 | A 40 121 833 05 31 | - | - |
| 073 | ATTACHING SCREW WIRE CABLE TO RIGHT DEFROSTER NOZZLE |
001 | A 12 136 831 00 89 | - | - |
| 074 | BUSHING WIRE CABLE TO RIGHT DEFROSTER NOZZLE |
001 | A 12 136 831 00 90 | - | - |
| WASHER 4,3 DIN 433 WIRE CABLE TO RIGHT DEFROSTER NOZZLE |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 WIRE CABLE TO RIGHT DEFROSTER NOZZLE |
001 | - | - | ||
| HEX. NUT B M 4 DIN 439 WIRE CABLE TO RIGHT DEFROSTER NOZZLE |
002 | - | - | ||
| TEROSTAT CORD, 20X2-MM (DEFROSTER NOZZLES TO COWL) ORDER BY THE METER |
NB | A 00 098 945 85 | - | - | |
| LENS HEAD SCREW A M 5X15 DIN 7985 DEFROSTER NOZZLES TO COWL |
004 | - | - | ||
| WASHER A 5,3 DIN 9021 DEFROSTER NOZZLES TO COWL |
004 | - | - | ||
| LOCK WASHER B 5 DIN 127 DEFROSTER NOZZLES TO COWL |
004 | - | - | ||
| 075 | GROMMET (DEFROSTER NOZZLE PASSAGE THROUGH COWL) |
002 | A 40 121 831 00 99 | - | - |
| 080 | OPERATION (FOR VENTILATION ON THE LEFT) |
001 | A 40 121 830 01 12 | - | - |
| 081 | OPERATION (FOR VENTILATION ON THE RIGHT) |
001 | A 40 121 830 02 12 | - | - |
| 082 | PRESSURE SPRING | 002 | A 10 186 888 00 34 | - | - |
| 083 | ATTACHING SCREW WIRE CABLES TO OPERATING LEVER |
004 | A 12 136 831 00 89 | - | - |
| 084 | BUSHING WIRE CABLES TO OPERATING LEVER |
004 | A 13 607 200 50 | - | $10.88 |
| WASHER 4,3 DIN 125 WIRE CABLES TO OPERATING LEVER |
004 | - | - | ||
| LOCK WASHER B 4 DIN 127 WIRE CABLES TO OPERATING LEVER |
004 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S WIRE CABLES TO OPERATING LEVER |
004 | - | - | ||
| 085 | OPERATION, CENTER (FOR HEATING) |
001 | A 40 121 830 03 12 | - | - |
| 086 | PRESSURE SPRING | 001 | A 10 186 888 00 34 | - | - |
| 087 | ATTACHING SCREW CENTER WIRE CABLE TO OPERATING LEVER |
002 | A 12 136 831 00 89 | - | - |
| 088 | BUSHING CENTER WIRE CABLE TO OPERATING LEVER |
002 | A 13 607 200 50 | - | $10.88 |
| WASHER 4,3 DIN 125 DBL 8451-11 CENTER WIRE CABLE TO OPERATING LEVER |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 DBL 8451-21 CENTER WIRE CABLE TO OPERATING LEVER |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S DBL 8451-21 CENTER WIRE CABLE TO OPERATING LEVER |
002 | - | - | ||
| 089 | ESCUTCHEON, LATERAL, LEFT AND RIGHT (FOR VENTILATION) |
002 | A 40 121 830 00 89 | - | - |
| ESCUTCHEON, CENTER (FOR HEATING) Replaced by: A 40 121 830 02 89 |
- | A 40 121 830 01 89 | - | - | |
| 090 | ESCUTCHEON, CENTER (FOR HEATING) |
001 | A 40 121 830 02 89 | - | - |
| HEX. HEAD SCREW M 6X8 DIN 933-8 G ESCUTCHEONS AND OPERATIONS TO INSTRUMENT PANEL |
006 | - | - | ||
| 091 | SPACER RING ESCUTCHEONS AND OPERATIONS TO INSTRUMENT PANEL |
006 | A 40 121 833 00 17 | - | - |
| WASHER 6,4 DIN 125 ESCUTCHEONS AND OPERATIONS TO INSTRUMENT PANEL |
006 | - | - | ||
| TOOTHED WASHER A 6,4 DIN 6797 ESCUTCHEONS AND OPERATIONS TO INSTRUMENT PANEL |
006 | - | - | ||
| HANDLE (FOR HEATING OPERATION) Replaced by: A 120 830 00 36 |
- | A 10 180 830 00 36 | - | - | |
| 092 | HANDLE (FOR HEATING OPERATION) |
006 | A 12 083 000 36 | - | - |
| GROMMET | 006 | A 10 180 833 00 91 | - | - | |
| 093 | HANDLE (FOR HEATING OPERATION) |
006 | A 11 183 303 40 | - | $22.08 |
| 094 | MOUNTING CLAMP WIRE CABLES TO COWL |
005 | A 13 699 506 01 | - | $12.65 |
| HEX. HEAD SCREW M 4X10 DIN 931-8 G DBL 8451-21 WIRE CABLES TO COWL |
005 | - | - | ||
| LOCK WASHER B 4 DIN 127 DBL 8451-11 WIRE CABLES TO COWL |
005 | - | - | ||
| GROMMET FOR WIRE CABLES Replaced by: A 180 997 08 81 |
- | A 18 699 706 81 | - | $1.79 | |
| 095 | GROMMET FOR WIRE CABLES |
002 | A 18 099 708 81 | - | $2.76 |
| GROMMET FOR WIRE CABLES Replaced by: A 180 997 11 81 |
- | A 00 099 718 81 | - | - | |
| 096 | GROMMET FOR WIRE CABLES |
001 | A 18 099 711 81 | - | - |
| CONNECTION HOSE, 185-MM LONG (FOR SCOOP AND CONNECTION FITTING) Replaced by: A 40 121 831 04 88 |
- | A 40 121 831 00 88 | - | - | |
| 097 | CONNECTION HOSE, 185-MM LONG (FOR SCOOP AND CONNECTION FITTING) |
001 | A 40 121 831 04 88 | - | - |
| HOSE STRAP 9X0,4X930 N 263 CONNECTING HOSE TO CONNECTION FITTING |
001 | - | - | ||
| HOSE CLAMP WSN 9 N 262 CONNECTING HOSE TO CONNECTION FITTING |
001 | - | - | ||
| 098 | HOSE, 390-MM LONG (AT DISTRIBUTOR, RIGHT SIDE, BETWEEN CONNECTION FITTING AND SCOOP) |
- | A 40 121 831 03 88 | - | - |
| HOSE STRAP 9X0,4X675 N 263 HOSE TO DISTRIBUTOR |
002 | - | - | ||
| HOSE CLAMP WSN 9 N 262 HOSE TO DISTRIBUTOR |
002 | - | - | ||
| HOSE, 250-MM LONG (FOR DEFROSTER NOZZLE) Replaced by: A 40 121 831 05 88 |
- | A 40 121 831 01 88 | - | - | |
| 099 | HOSE, 250-MM LONG (FOR DEFROSTER NOZZLE) |
002 | A 40 121 831 05 88 | - | - |
| HOSE STRAP 9X0,4X500 N 263 HOSE TO DEFROSTER NOZZLE |
002 | - | - | ||
| HOSE CLAMP WSN 9 N 262 HOSE TO DEFROSTER NOZZLE |
002 | - | - | ||
| 100 | FEED LINE | 001 | A 40 121 830 00 15 | - | - |
| 101 | RETURN LINE | 001 | A 40 121 830 00 16 | - | - |
| 102 | MOUNTING CLAMP RETURN LINE TO WHEEL ARCH PANEL |
001 | A 18 699 500 37 | - | - |
| LENS HEAD SCREW A M 6X15 DIN 7985 RETURN LINE TO WHEEL ARCH PANEL |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 RETURN LINE TO WHEEL ARCH PANEL |
001 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S RETURN LINE TO WHEEL ARCH PANEL |
001 | - | - | ||
| LENS HEAD SCREW A M 6X15 DIN 7985 FEED LINE AND RETURN LINE TO COWL |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FEED LINE AND RETURN LINE TO COWL |
002 | - | - | ||
| REPLACED BY 16X3,5X210 DIN 73 411 |
- | A 40 121 831 00 97 | - | - | |
| REPLACED BY 16X3,5X210 DIN 73 411 |
- | A 11 120 831 00 97 | - | - | |
| 103 | HOSE (FOR FEED LINE AND RETURN LINE) 16X3,5X210 DIN 73 411 |
002 | - | - | |
| HOSE STRAP 5X0,35X140 N 263 HOSES TO FEED LINE AND RETURN LINE AS WELL AS TO ENGINE |
004 | - | - | ||
| HOSE CLAMP WSN 5 N 262 HOSES TO FEED LINE AND RETURN LINE AS WELL AS TO ENGINE |
004 | - | - |
- To find out where to buy the item or equivalent, click on the part number.